===== Hardware =====

==== Netzwerkgeräte ====

=== Switch ===

| Name  | VLAN  | Phys. Ports  |
| todesstern-1  | FA  | 21, 22, 23, 24  |
| todesstern-3  | FA  | 4  |

=== VLAN-Router ===

| Name | Firmware | Ziel | FA-intern |
| TPLink | OpenWRT V. 23.x | 192.168.250.0/24 | [[https://192.168.250.1|192.168.250.1]] |

=== Accesspoints ===

| Name | Firmware | Ziel | Name | Switch |
| TPLink | OpenWRT V. 23.x | [[https://192.168.250.1|192.168.250.1]] | Farpoint | todesstern-1 |
| TPLink | OpenWRT V. 23.x | [[https://192.168.250.2|192.168.250.2]] | Farnborough | todesstern-2 |

==== IOT-Geräte ====

=== Schaltsteckdose:  nous smart tasmota wifi socket A1T ===

{{ :projekte:fabaccess:nous-a1t-smarte-steckdose-tasmota-firmware-wlan-4er-set.pdf }}

| Mac  | Bereich  |
| 08:3A:8D:F0:A8:31  | Elektronik  |
| 08:3A:8D:F0:8B:3F  | Elektronik  |
| 08:3A:8D:F0:B5:06  | Elektronik  |
| 08:3A:8D:F0:B3:3B  | Elektronik  |
| 08:3A:8D:F0:98:1D  | Elektronik  |
| 08:3A:8D:F0:9D:FB  | Elektronik  |
| C8:C9:A3:1E:08:4E  | Elektronik  |
| 08:3A:8D:F0:9A:4C  | Elektronik  |
| 34:94:54:83:7D:6F  |   |
| 7C:87:CE:B8:07:BC  |   |
| 34:94:54:83:6D:80  |   |
| 34:94:54:83:88:B2  |   |
| 34:94:54:83:3C:DC  |   |
| 34:94:54:83:00:9C  |   |
| 34:94:54:83:5E:C2  |   |
| 34:94:54:83:86:3D  |   |
| 34:94:54:83:6E:45  |   |
| 34:94:54:83:5D:9F  |   |
| 34:94:54:83:61:FB  |   |
| 34:94:54:83:3C:3F |   |
| 34:94:54:83:78:EC  |   |
| 34:94:54:83:75:AA  |   |
| 34:94:54:83:3C:DB  |   |
| 34:94:54:83:70:A9  |   |
| 34:94:54:83:56:98  |   |
| 34:94:54:83:66:02  |   |
| 34:94:54:83:70:F8  |   |
| 34:94:54:83:6E:15  |   |
| 34:94:54:83:5A:4A  |   |
| 34:94:54:83:38:FA  |   |
| 34:94:54:83:2F:0B  |   |
| 34:94:54:83:35:64  |   |
| 34:94:54:83:63:DD  |   |
| 34:94:54:83:85:85  |   |
| 34:94:54:83:83:C2  |   |
| 34:94:54:83:37:E8  |   |
| 34:94:54:83:60:4A  |   |
| 7C:87:CE:B7:0F:8C  |   |
| 34:94:54:83:5C:36  |   |
| 34:94:54:83:3B:FC  |   |
| 34:94:54:83:77:33  |   |
| 34:94:54:83:36:A3  |   |
| 34:94:54:83:79:33  |   |
|   |   |
|   |   |
|   |   |

**Tasmota Konfig-RESET**:

7x Ein / Aus (Einschaltzeit < 10 s) - beim 7. Mal eingeschaltet lassen

  - Cut power from the device completely for 30 seconds 
  - Power the device on and off six times with intervals lower than 10 seconds and leave it on after seventh time 
  - Fast power cycle device recovery should activate and the device should be reset to firmware defaults

**Einrichtung**:

  - plug the socket for energy 
  - connect to tasmota @ local AP (192.168.4.1)
  - tasmota: configure wifi "Sternenlabor"you can use this link --> [[http://192.168.4.1/wi?s1=Sternenlabor&p1=%21Sternenlabor99%21&save=]]--> write down IP-address: 192.168.**//200//**.#
  - tasmota: connect to tasmota @ Sternenlabor 192.168.**//200//**.#
  - tasmota: configure MQTT
  - EXT: check MQTT --> IP: 192.168.**//200//**.# (MQTT Explorer)
  - tasmota: get MAC
  - MAN: label the plug with the last six MAC-Numbers
  - WIKI: insert MAC into the upper table
  - EXT: configure wifi "slfa" - Accesspoints --> Farpoint ([[https://192.168.250.1|192.168.250.1]] bzw. [[https://192.168.200.16|192.168.200.16]]) / Farnborough ([[https://192.168.250.2|192.168.250.2]]) to accept MAC from tasmota
  - tasmota: configure wifi "slfa"
  - EXT: check MQTT --> IP: 192.168.**//250//**.# (MQTT Explorer)

[[projekte:fabaccess:software:server:iot:tasmota|Konfiguration]]